Faraday Fabric Panel 3.25 x 2.75 m – Mission Darkness TitanRF Panel

Description

Mission Darkness TitanRF Panel is a large radio frequency signal shielding fabric panel designed for covering walls or constructing shielded enclosures, rooms, tents, or cages. The panel consists of three TitanRF fabric strips joined and sealed on both sides with TitanRF Faraday Tape.

Features

• Blocks Wi-Fi, cellular signals (including 5G), GPS, Bluetooth, RFID, NFC, and radio signals from low MHz up to 40 GHz.
• Signal attenuation reaches over 65 dB.
• Made from polyester fiber with copper and nickel; surface resistance is approximately 0.5 Ω/sq.
• Tested at Keystone Compliance laboratory according to MIL-STD-188-125 and IEEE 299-2006 standards.
• Fabric is lightweight, corrosion-resistant, and can be cut, sewn, and glued like standard textiles.
• Includes an instructional guide with installation tips.

Specifications

• Dimensions: 3.25 x 2.75 m (8.92 m²)
• Construction: three strips measuring 2.74 m in length and 112 cm in width, joined by 6.35 cm wide TitanRF tape
• Composition: 74% polyester, 22% nickel, 4% copper
• Thickness: 180 ± 20 µm
• Density: 78 ± 5 g/m²
• Attenuation: greater than 65 dB
• Frequency range: low MHz to 40 GHz

How to Use

The fabric can be installed between drywall sheets, glued with a thin layer of contact adhesive, or secured using tape. It is recommended to use as few screws as possible. For a shielded room, MOS recommends applying two layers to floors, ceilings, and walls, ensuring overlapping seams with no gaps. The fabric is electrically conductive and flammable, so keep it away from electrical outlets and wiring. Wear gloves during handling if your skin is sensitive to nickel or copper.